Landlords and property managers in East Greenwich have a different relationship with electrical work than a homeowner does. A homeowner calls when something stops working. A landlord calls because a tenant called, because a unit is turning over, because an inspection is coming up, or because a building that was fine last year now needs to meet a standard it did not have to meet before. The work is the same, but the timing, the access, and the stakes are different. We scope jobs for rental properties, multi-family buildings, and commercial spaces across East Greenwich and Kent County, and we handle the coordination that comes with work on an occupied or recently vacated property.
We also work with homeowners throughout the area on everything from a dead outlet to a full rewiring project.
If you are managing a property or own a home in East Greenwich and need electrical work done properly, call (401) 535-9265 for a quote. We are available every day from 7:30 AM to 11:00 PM.
Not every outage or electrical failure is a problem we can fix, because not every fault sits on the homeowner's side of the meter. When power goes out in part of a house, the location of the failure matters. A tripped breaker, a failed outlet, or a section of the home that has lost power while the rest works normally points to a fault on the customer's side. That is work we handle.
A full outage affecting the whole property, or a situation where the neighbors are also out, usually points to the utility. In that case, the right call is to the power company, not to us.
Where it gets less clear is the service entrance: the wiring that runs from the utility connection into the meter and then into the panel. Damage there, a loose connection at the weatherhead, or a failed meter base can look like a utility problem and turn out to be on the customer's side of the line. We can assess that on-site and tell you what we are looking at. If the fault is past the point where we can work, we will tell you that directly and explain what to report to the utility. Straight answers about your panel and wiring are part of how we work.
A dead outlet is one of the most common calls we get, and the fix depends on what caused it. A tripped GFCI upstream can knock out several outlets at once. A loose connection at the device or in the box is another common cause. We find the source rather than replacing the outlet and hoping for the best. Switch replacement, dimmer installation, and adding outlets to rooms that are short on them all follow the same pattern: assess the circuit, confirm it can carry the additional load, and do the work to the standard the next inspection expects.
Doorbell wiring, data runs, and low-voltage rough-in come up regularly in older homes that were built before those systems were standard. Running low-voltage cabling through finished walls without tearing them apart takes planning, and we work through that with the homeowner before anything is opened up.
A dryer, a range, a refrigerator on its own circuit, a sump pump, or the dedicated circuit that feeds a heating or cooling unit all need a circuit sized for the load they draw. Sharing those draws with other circuits causes repeated tripping and puts stress on the wiring over time. We run dedicated circuits from the panel to the appliance location, size the breaker and wire gauge correctly, and confirm the panel has capacity before pulling any wire.
EV charger installation follows the same process. A Level 2 charger needs a dedicated 240-volt circuit, and the job starts with a load calculation. If the panel is near its limit, that conversation happens before the circuit is run.
Ground-fault protection is required in kitchens, bathrooms, garages, and anywhere an outlet is near water. Arc-fault protection is required on bedroom circuits and in other locations under current code. Older homes in this part of Rhode Island frequently have neither, and a home inspection or insurance review is often what brings it to the surface. We install GFCI outlets and breakers, AFCI breakers, and combination devices where both are required, and we test them after installation to confirm they trip correctly.
Most electrical jobs do not require shutting down the whole house. Replacing an outlet, adding a circuit, or installing a new fixture only requires isolating the circuit involved. The rest of the home stays live. We identify which breaker controls the work area before we start, confirm it is properly labeled, and work from there.
Panel work is different. Replacing a breaker panel, upgrading the service entrance, or adding a subpanel requires the main power to be off for a period. For a homeowner, that is a planning conversation: we talk through what will be off, roughly how long the work takes, and what to prepare. For someone working from home, that means knowing in advance so a laptop can be charged and a backup plan is in place before we arrive.
For a business that has to stay open, we look at whether the work can be staged. Some panel work can be done in sections, keeping parts of the building live while others are isolated. That is not always possible, but it is worth asking about on the call when the situation calls for it. We show up ready to work.
Most electrical calls are not emergencies, and most can be scheduled at a time that works for the homeowner, the tenant, or the property manager. We work every day from 7:30 AM to 11:00 PM, which covers most situations without asking anyone to take a day off. For rental properties, we coordinate access with whoever is on-site and confirm the scope before the visit so there are no open questions at the door.
A burning smell near a panel or outlet, a breaker that trips immediately on reset, or a section of the home that has lost power without explanation are all reasons to call the same day rather than waiting. We take short-notice work when the schedule allows.
Call (401) 535-9265, describe what you are seeing, and we will tell you what is available.
Simple scheduling. Pricing agreed up front. Power back fast.
The price for any job is confirmed before anything is scheduled. When you call, we go through the job with you, ask the right questions, and give you the rate based on what the work involves. That is the number you have before we show up.
What can change a quote is what the job turns out to involve once we can see the wiring. An outlet replacement on a circuit with solid wiring and a panel that has capacity is a straightforward job. The same outlet replacement in a wall that opens up to aluminum branch wiring, or on a panel that is already at its limit, involves more. We explain that on-site before we proceed, not after. Every job gets treated like it matters, because it does.
The things that most often move a quote are the condition of the existing wiring, whether the panel has room for the circuit being added, and what has to be opened up to reach the fault. We do not charge for surprises we did not explain. If the scope changes, the conversation happens first.
The gap between tenants is the right time to do electrical work that would otherwise mean scheduling around someone's day. With a unit empty, there is no coordination to manage, no one to work around, and no concern about disrupting a household. We can assess the wiring, update outlets, add GFCI protection, run a dedicated circuit, or address anything that came up on the last inspection without the complications that come with an occupied space.
Access to a vacant unit is usually straightforward. A key left with a property manager, a lockbox code confirmed on the call, or a brief walkthrough with the owner before we start are all arrangements we work with. We confirm what is needed before the visit and make sure the unit is left in order when the work is done.
Real experience. Local knowledge. Ready to wire.
We work throughout East Greenwich and take calls from across the surrounding communities in Kent County and the wider region. If you are outside East Greenwich, call and we will confirm whether your address falls within our service area.
Communities we cover regularly include:
Whether the property is in East Greenwich or a nearby town, the process is the same: scope the job on the call, confirm the price, and carry out the work to the code inspectors here enforce. What each job covers is written out on the electrical services page.
A load calculation adds up the draw from every circuit in the home, including major appliances, lighting, and any new load being added. It tells us whether the panel's rated capacity can carry what is being asked of it without running at the edge.
Yes, and that is often the easiest time to do it. With no tenant in place, there is no scheduling to work around and no household to disrupt. We confirm access arrangements on the call and leave the unit in order when the work is complete.
Yes. We work with landlords and property managers on multi-family buildings, rental units, and investment properties throughout East Greenwich and Kent County. The process is the same as any other job: we scope the work on the call, confirm the price, and coordinate access with whoever is on-site.
The most common findings in older homes across this region are knob-and-tube wiring, aluminum branch wiring, and panels that were sized for a much lighter load than the home now carries. A safety inspection is the right starting point if the wiring has never been assessed or if a home inspector or insurer has raised questions about it.
The symptom, where it is happening, when it started, and whether anything changed around the time it began. If a breaker has tripped, note which one. If an outlet stopped working, note whether others nearby are also affected. The more specific the description, the more accurately we can scope the job before arriving.
The job is not finished when the last wire is connected. It is finished when the work is tested, the area is left clean, and you know what was done and why.
Call (401) 535-9265 to get a quote on any electrical repair, installation, or upgrade in East Greenwich or the surrounding area. We are available every day from 7:30 AM to 11:00 PM.
Other towns where we take electrical work: West Warwick, North Kingstown, Warwick, Coventry. For every town we reach, see our full coverage area.
Below is a plain-language breakdown of the electrical work we handle in East Greenwich and across Kent County. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If your situation does not fit neatly into one row, call and we will talk through it.
| Type of Work | Scope of Work | When You Need It | Things to Know |
|---|---|---|---|
| Lighting Installation |
| Homeowners updating fixtures or adding outdoor lighting that was not originally wired | Exterior outlets and fixtures need weatherproof covers and GFCI protection regardless of the circuit they are on. |
| Wiring & Circuit Installation |
| Renovations, additions, and homes where wiring has been flagged during an inspection | Whole-home rewiring is a multi-day project. Partial rewires are scoped to what the home actually needs. |
| Electrical Panel UpgradesMost Popular |
| Older East Greenwich homes adding appliances, EV chargers, or additions | Many pre-1960s homes in this area are still on 60-amp or 100-amp service, which falls short of modern demand. |
Call (401) 535-9265 to talk through your electrical situation and get a price before anything is scheduled.
(401) 535-9265